Brick and Stone Repair
Provides both aesthetic and function to the exterior façade of a structure by updating the mortar joints or actually replacement of missing, cracked or delaminated parts of the façade. |
| - Tuckpointing |
- Brick Replacement |
- Stucco Repairs |
|
 |
Thru Wall Flashing Repairs
The purpose of thru wall flashing is to export all moisture or water intrusion that enters the exterior wall system. Many water intrusion issues are exposed by actually removing the exterior façade and getting to the thru wall flashing and making proper repairs. |
| - Stucco |
- Brick |
|
|
|
Expansion/Control Joint Systems Repair
Due to the dynamic movement or usage that many structures incur, the stress over time causes failures that can create water intrusion issues, substrate deterioration, or safety hazards. Since the average lifespan of an expansion joint system is between 5-10 years at best, routine maintenance and replacement is a cost effective method to avoid major repair cost. |
| - Interior Walls/Ceilings |
- Exterior Facade |
- Parking Structure |
- Roofing |
|
|
Caulking and Sealants
Provides important protection for structures against water-intrusion, air-infiltration, insect-intrusion. glazing failures, and slab control joint protection. Since all sealants have a lifespan, some more than other. We offer complete removal and replacement services, as well as minor repairs on all building types and substrates for all sealant types listed below. |
| - Silicone |
- Urethane |
- Polyurea |
- Epoxy |
|
|
Coatings
Provides not only and architectural element to a structure but also acts as protection against moisture, and airborne pollutants such as carbon and salts. In most cases the addition or maintenance of a coating system will provide you with a high level of protection considering the average lifespan on most systems are between 5-10 years. |
| - Elastomeric Coatings |
- Acrylic Coatings |
- Pedestrian Traffic Coatings |
- Vehicular Traffic Coatings |
| - Decorative Pedestrian Coating |
- Epoxy Floor Coating |
- PMMA Traffic/Pedestrian Coatings |
|
|
|
Structural Repairs
Provides your structure with the integrity required for it to perform without possible catastrophic failure. We can provide minor or major repairs as needed. |
| - Carbon Fiber Reinforcement |
- Rebar Repairs |
- Penetrating Corrosion Inhibitors |
- Concrete Mortar Repairs |
| - Epoxy Mortar Repairs |
|
|
|
|
|
Chemical Grouts
Provides structural integrity and protection against water intrusion to cracks in substrates due to unforeseen conditions such as dynamic movement or substandard substrates. |
| - Epoxy |
- Urethane |
|
|
|
Cleaning and Sealing
Provides protection and helps reduce efflorescence, atmospheric staining, and mildew. Ideal for use on precast or stone structures by providing a substrate that’s clean but maintains its natural texture |
| - Clear Penetrating Sealers |
- Decorative Stains |
|
|
|
Decorative Coping Coating
Provides watertight protection to one of the most vulnerable parts of a structure without a complete removal and replacement of the in place coping by simply covering what’s in place. |
| - Reinforced Decorative PMMA Coating |
|
Waterproofing
Provides long lasting protection to a structure from water intrusion by installing protection at the point of entry or from inside of a structure or from inside a structure. We offer repairs or removal and replacement services on all building types and for all materials listed below. |
| - Hot-Applied Membrane Systems |
- Sheet Membrane |
- Bentonite Waterproofing |
- Fluid-Applied |
| - Capillary/Crystalline Systems |
|
|
|
|
Roofing
Provides long lasting protection and functionality to areas that are typically not used. The following types of roofing systems also provide credits toward LEED Building Certification. |
| - Hot-Applied Systems |
- Garden Roof Systems |
- Decorative Paver Systems |
|
|
