Spray Fireproofing Systems

Intumescent, Cementitious & Sprayed Fiber Fireproofing For Steel Application

Life safety plays a vital role in the design of buildings in today’s commercial and industrial construction. Sprayed-on fireproofing systems provide a cost-effective approach to meet the hourly ratings required by local building codes and insurance companies. Intumescent fireproofing systems provide an aesthetically pleasing finish for exposed steel columns and beams to achieve the same required hourly ratings.

Fireproofing systems provide up to a four-hour rating on structural members, helping to prevent steel from collapsing during a fire. Spray applied, intumescent or board fireproofing are passive forms of protection that are always ready to protect the steel — and ultimately lives — in the event of a fire. Passive systems are constantly in place, as opposed to active systems, such as sprinklers, which are required to activate before they perform.

Alpha is a certified SFRM/IFRM installer by the NFCA and approved installers of GCP Applied Technologies, Isolatek International, Hilti, Albi, Sherwin-Williams and Carboline fireproofing systems

NFCA logo

spray fireproofing systems by Alpha

Our Capabilities Include:

Cementitious or Sprayed Fiber Fireproofing (SFRM)

Intumescent Fireproofing (IFRM)

Board Fireproofing

Fire Ratings & Code Compliance

Full Range of Application Methods

Added Performance Benefits

Nationwide Project Experience

Mission-Critical & High-Rise Expertise

Dedicated Fireproofing Division Since 1982

Why Choose Alpha:

Expertise across multiple industries

Certified installation for consistent, high-quality results

Energy-efficient and performance-driven solutions

Compliance with all applicable building codes and standards

Coordinated project execution for faster turnaround

Decades of Experience. Proven Performance.

With more than 40 years of industry experience, Alpha has built long-standing relationships with contractors, developers, and institutional partners nationwide. Our teams bring deep technical knowledge, rigorous safety standards, and a commitment to delivering projects right the first time.

40+
Years in business
15
Regional Offices
12+
Safety certifications

Frequently Asked Questions

Can spray fireproofing be painted?

Many spray fireproofing products can be coated with a thin layer of latex paint to improve aesthetic appearance. Check with the manufacturer for recommended coatings and preparation steps — our team can recommend the best solution to protect your facility while maintaining its appearance.

Yes — moisture can damage most spray fireproofing products, especially cementitious or fiber-based coatings, so they shouldn’t be installed in areas exposed to moisture or standing water. Talk to our team for recommendations on the best products for moisture-prone areas.

For proper adhesion and curing, structural steel should be thoroughly cleaned before fireproofing is applied — removing grease, oil, dirt, rust, and mill scale, then applying a compatible primer if required.

Most spray fireproofing products require 14 to 28 days to fully cure, depending on the temperature and humidity at the installation site.

Spray-fiber fireproofing is engineered to give first responders more time to evacuate personnel and helps prevent structural collapse, with performance based on the specific system and application selected for your building’s code requirements.